Loading
Loading
Your feedback directly shapes Sporos.
Sign in to track your feedback history
Browse 4,647 rules and proposed rules from the Federal Register.
4,647
Total Regulations
Showing 2,851–2,880 of 4,647
Page 96 / 155
This proposed rule removes from the Code of Federal Regulations: OSHA's Safety Color Code for Marking Physical Hazards Standard, 29 CFR 1910.144; paragraph (c)(8) of OSHA's Textiles Standard, 29 CFR 1910.262; paragraph (c)(11) of OSHA's Sawmills Standard, 29 CFR 1910.265; and OSHA's Safety Color Code for Marking Physical Hazards for Shipyard Employment Standard, 29 CFR 1915.90.
This rule makes administrative updates to FRA's training, qualification, and oversight regulations, including updating addresses in those regulations.
This proposed rule removes OSHA's Open Fires in Marine Terminals Standard from the Code of Federal Regulations.
This proposed rule removes OSHA's House Falls in Marine Terminals Standard from the Code of Federal Regulations.
This proposed rule revises some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's 1,2-Dibromo-3-Chloropropane standard and better aligns this standard with OSHA's Respiratory Protection standard.
This DFR amends PHMSA's regulations to incorporate by reference the updated industry standard ASTM F2767, Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
This DFR amends PHMSA's pipeline safety regulations to incorporate by reference the updated industry standard National Fire Protection Association (NFPA) 70, National Electrical Code (NEC). This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
This rule makes administrative updates to FRA's rear end marking device regulations, including updating addresses in those regulations.
This proposed rule revises some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's 1,3-Butadiene standard and better aligns this standard with OSHA's respiratory protection standard.
This DFR amends PHMSA's regulations to incorporate by reference the updated industry standard PPI TR-4, PPI HSB Listing of Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Strength Design Basis (SDS), Pressure Design Basis (PDB) and Minimum Required Strength (MRS) Ratings For Thermoplastic Piping Materials or Pipe. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
This NPRM proposes to revise the Hazardous Materials Regulations (HMR) to allow for the continued use of packagings authorized under a manufacturing special permit for duration of the useful life of the package. The current HMR provisions require an otherwise safe and usable package to be discontinued solely because the original special permit has expired or was not renewed.
This DFR amends PHMSA's regulations to incorporate by reference the updated industry standard PPI TR-3, Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
The Department of Labor (Department) is proposing to remove the requirement that States use State merit staff to provide Wagner- Peyser Employment Service (ES) services. This deregulatory action would allow States to use the staffing model that provides the required services with the most efficient model for their State. This summary can be found at www.regulations.gov by searching by the RIN: 1205-AC22.
OSHA proposes to clarify its interpretation of the General Duty Clause, 29 U.S.C. 654(a)(1), to exclude from enforcement known hazards that are inherent and inseparable from the core nature of a professional activity or performance.
This NPRM proposes to expand the Fireworks Certification Agency's (FCA) authority to approve fireworks constructed to the APA 87-1A standard to include those fireworks constructed to the APA 87-1B and APA 87-1C standards. PHMSA is also proposing to revise its procedural regulations to facilitate new FCA authorizations. These proposed actions are intended to streamline PHMSA's fireworks approval process and provide the industry with regulatory flexibility.
This proposed rule revises some provisions of OSHA's Acrylonitrile standard to better align it with OSHA's Respiratory Protection standard.
This proposed rule revises some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's 13 Carcinogens standard and better aligns this standard with OSHA's respiratory protection standard.
This proposed rule revises some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's Asbestos standards and better aligns these standards with OSHA's Respiratory Protection standard.
This DFR amends the pipeline safety regulations to incorporate by reference the updated industry standard ASTM F2817, Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings for Maintenance or Repair. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
This proposed rule would revise some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's Benzene standard and would better align this standard with OSHA's Respiratory Protection standard.
PHMSA proposes to adopt the provisions of DOT special permit (SP) 21478 into the Hazardous Materials Regulations (HMR). Adoption of this special permit would authorize intermediate bulk containers (IBCs) containing a residue of a certain hazardous materials to be transported without shipping papers, placards, and motor vehicle marking of the UN identification (ID) number subject to additional operational controls. The proposed revisions provide relief from undue burdens of hazard communication requirements for low-risk transportation of empty packaging and eliminate the need for special permit renewal requests.
PHMSA proposes adopting the provisions of Department of Transportation (DOT) special permit (SP) 14175 into the hazardous materials regulations to authorize a 10-year requalification period when using the ultrasonic examination (UE) testing method for DOT specification 3A and 3AA used for flammable and non-flammable, nonpoisonous gas service. The proposed adoption reflects advances in testing technology and would relieve the burden of performing more frequent cylinder requalification.
This proposed rule revises some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's Cadmium standards and better aligns these standards with OSHA's Respiratory Protection standard.
MARAD is rescinding four obsolete parts in its regulations pertaining to procedures for assigning priority use of commercial shipping services and port facilities, vessel allocation services, and port utilization under Title I of the Defense Production Act (DFA) of 1950. On October 1, 2012, the Department of Transportation (DOT), Office of the Secretary (OST) established the Department's Transportation Priorities and Allocation System (TPAS) in 49 Code of Federal Regulations (CFR) part 33, which replaces the subject regulations in 46 CFR parts 340 and 345-347 regarding priority use and allocation of shipping services, restrictions on port utilization transfer or changes, the standard form of service agreements for ports, and the standard form of marine terminal contracts. Rescinding these regulations will improve clarity with respect to the implementation and administration of TPAS and recognize the centralization of TPAS within DOT its administration by OST.
This proposed rule revises the filing thresholds in 29 CFR 403.4(a) for the Forms LM-2, LM-3, and LM-4 Labor Organization Annual Reports. This summary can be found at www.regulations.gov by searching by the RIN: 1245-AA15.
This proposed rule would revise some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's Coke Oven Emissions standard and better align this standard with OSHA's Respiratory Protection standard.
This DFR amends PHMSA's procedural regulations to establish a rule of construction clarifying the operation of procedural filing deadlines scheduled to fall on weekends and Federal holidays.
This NPRM streamlines the Hazardous Materials Regulations by allowing a grantee to file an application to renew a special permit or approval any time before its expiration date rather than requiring the application to be filed 60 days in advance.
This proposed rule revises some substance-specific respirator requirements to allow different types of respirators to be used under OSHA's Cotton Dust standard and better aligns this standard with OSHA's Respiratory Protection standard.
This DFR amends PHMSA's regulations to incorporate by reference the updated industry standard ASTM F2945, Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.