Loading
Loading
Your feedback directly shapes Sporos.
Sign in to track your feedback history
Browse 304 rules and proposed rules from the Federal Register.
304
Total Regulations
Showing 271–300 of 304
Page 10 / 11
The Coast Guard is establishing a temporary safety zone for navigable waters within a 500-yard radius of the vessels Ugle Duckling and Streak. The safety zone is necessary to protect vessels while a HAUV/ROV survey is conducting underwater surveys. Entry of vessels into this zone is prohibited unless specifically authorized by the Captain of the Port Sector Northern Great Lakes (COTP).
The Coast Guard is amending existing regulations relating to special local regulations and safety zones that occur annually in Captain of the Port Zone Eastern Great Lakes. This action is necessary to provide for the safety of life on these navigable waters.
The Coast Guard published a notification of enforcement of regulation in the Federal Register on April 1, 2025, concerning the enforcement a safety zone for the Greater Bath Foundation Fireworks Display, Bath Creek, Bath, NC. That document contained an incorrect CFR citation. This document corrects that citation.
The Coast Guard is establishing a temporary safety zone for certain navigable waters of the Matagorda Ship Channel. The safety zone is needed to protect personnel, vessels, and the marine environment from potential hazards created by the repair of submerged dredge pipeline in the Matagorda Ship Channel. Entry of vessels or persons into this zone is prohibited unless specifically authorized by the Captain of the Port, Sector Corpus Christi, or a designated representative.
The Coast Guard is establishing a temporary, moving safety zone to surround nearshore operations conducted by a cable laying barge. This action is necessary to provide for the safety of life on these navigable waters near Virginia Beach, Virginia. Cable lay and burial operations will create navigational hazards moving along a corridor from shore extending seaward 12 NM. This rulemaking will prohibit persons and vessels from entering the safety zone unless authorized by the Captain of the Port, Sector Virginia or a designated representative.
The Coast Guard is establishing 55 temporary safety zones around the construction of individual wind energy facilities during the development of the Empire Wind 1 Wind Farm project area. The area lies within Federal waters on the Outer Continental Shelf, specifically in the Bureau of Ocean Energy Management Renewable Energy Lease Area OCS-A 0512, approximately 12 nautical miles south of Long Island, NY. This action protects life, property, and the environment during construction of each facility. When being enforced, only attending vessels and vessels with authorization are permitted to enter or remain in the temporary safety zones.
The Coast Guard is proposing to amend a published safety zone for certain waters of Lake Michigan encompassing the Milwaukee Air and Water Show to include an additional day. This action is necessary to provide for the safety of life on these navigable waters in the vicinity of McKinley Park and Bradford Beach, during this recurring event on the third weekend in July. This proposed rulemaking would prohibit persons and vessels from being in the safety zone unless authorized by the Captain of the Port Sector Lake Michigan or a designated representative. We invite your comments on this proposed rulemaking.
The Coast Guard will enforce special local regulations for the Greater Bath Foundation Fireworks Display, Bath Creek, Bath, NC on June 28, 2025, to provide for the safety of life on navigable waterways during this event. Our regulation for marine events within the Fifth Coast Guard District identifies the regulated area for this event in Bath, NC. During the enforcement periods, the operator of any vessel in the regulated area must comply with directions from the Patrol Commander or any Official Patrol displaying a Coast Guard ensign.
The Coast Guard is establishing a temporary safety zone on the navigable waters of the San Francisco Bay, off of Pier 15, in San Francisco, CA in support of fireworks displays on March 22, 2025, March 29, 2025, April 19, 2025, April 26, 2025, and May 3, 2025. This safety zone is necessary to protect personnel, vessels, and the marine environment from potential hazards created by pyrotechnics. Unauthorized persons or vessels are prohibited from entering into, transiting through, or remaining in the safety zone without the permission of the Captain of the Port, Sector San Francisco or a designated representative.
In June 2019, the U.S. Consumer Product Safety Commission (CPSC or Commission) published a consumer product safety standard for stationary activity centers pursuant to section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA). The Commission's mandatory standard incorporates by reference ASTM F2012-18[egr]\1\, Standard Consumer Safety Performance Specification for Stationary Activity Centers. The CPSIA sets forth a process for updating mandatory standards for durable infant or toddler products that are based on a voluntary standard, when a voluntary standards organization revises the standard. In November 2024, ASTM published a revised voluntary standard. This direct final rule updates the mandatory standard for stationary activity centers to incorporate by reference the 2024 version of ASTM F2012, which the Commission has allowed to become the mandatory standard under section 104. The purpose of the direct final rule is to conform the Code of Federal Regulations (CFR) to the correct version of ASTM F2012 to provide an accurate reference to the standard that will be enforced as a mandatory rule.
In response to requests from stakeholders, the Environmental Protection Agency (EPA or Agency) is amending the deadline for reporting pursuant to the Toxic Substances Control Act (TSCA) Health and Safety Data Reporting rule, which requires manufacturers (including importers) of 16 specified chemical substances to report certain lists and copies of unpublished health and safety studies to EPA. Specifically, EPA is amending the deadline from March 13, 2025, to June 11, 2025, for one of the 16 chemical substances (vinyl chloride) and to September 9, 2025, for the remaining 15 chemical substances. The Health and Safety Data Reporting Rule requires manufacturers (including importers) of certain chemical substances to submit lists and copies of certain unpublished health and safety studies to EPA.
This notice announces that the FAA will not take enforcement action against regulated entities for failing to comply with the final rule titled "Foreign Air Operator Certificates Issued by a Regional Safety Oversight Organization" until March 20, 2025.
This notice announces that the National Highway Traffic Safety Administration will not enforce the requirements of the final rule titled "Implementing the Whistleblower Provisions of the Vehicle Safety Act" until March 20, 2025.
This document corrects a January 7, 2025 final rule that amended Federal Motor Vehicle Safety Standard (FMVSS) No. 225; "Child restraint anchorage systems," and FMVSS No. 213b; "Child restraint systems," to improve ease-of-use of the lower and tether anchorages, improve correct use of child restraint systems in vehicles, and maintain or improve the correct use and effectiveness of child restraint systems (CRSs) in motor vehicles. The final rule fulfilled a mandate of the Moving Ahead for Progress in the 21st Century Act (MAP- 21) requiring that NHTSA improve the ease-of-use for lower anchorages and tethers in all rear seat positions.
This notice announces that NHTSA will not take enforcement action against regulated entities for failing to comply with the Bus Rollover Structural Integrity final rule and the Bus Rollover Structural Integrity final rule; partial grant of petitions for reconsideration until March 20, 2025.
On September 16, 2024, HUD published the "Manufactured Home Construction and Safety Standards" final rule (MHCSS 4th and 5th Sets) in the Federal Register. The MHCSS 4th and 5th Sets final rule established a March 17, 2025, effective date. Consistent with the President's January 20, 2025, memorandum titled "Regulatory Freeze Pending Review", this document announces that HUD is delaying the effective date for the MHCSS 4th and 5th Sets final rule until September 15, 2025.
This document announces that FMCSA will not take enforcement action against regulated entities for failing to comply with the final rule and correction titled "Federal Motor Carrier Safety Regulations; Correction" until March 20, 2025.
This document announces that FTA will not take enforcement action against regulated entities for failing to comply with the State Safety Oversight final rule, published on October 18, 2024, until March 20, 2025.
The U.S. Consumer Product Safety Commission (CPSC) is correcting an error in a direct final rule, "Safety Standard for Play Yards," issued pursuant to a statutory requirement in section 104 of the Consumer Product Safety Improvement Act (CPSIA), and published on January 29, 2025.
This document delays until March 20, 2025, the effective date of the December 20, 2024, final rule that adopted Federal Motor Vehicle Safety Standard (FMVSS) No. 305a to replace FMVSS No. 305, "Electric- powered vehicles: Electrolyte spillage and electrical shock protection." FMVSS No. 305a applies to light and heavy vehicles and includes performance requirements for the propulsion battery. The final rule also established a part entitled, "Documentation for Electric- powered Vehicles," that requires manufacturers to compile risk mitigation documentation and submit standardized emergency response information to assist first and second responders handling electric vehicles.
This document delays until March 20, 2025, the effective date of the January 3, 2025, final rule that amended Federal Motor Vehicle Safety Standard (FMVSS) No. 208, "Occupant crash protection," to require a seat belt use warning system for rear seats and enhance the seat belt warning requirements for the front outboard seats.
The U.S. Consumer Product Safety Commission (CPSC) is correcting an error in a direct final rule, "Safety Standard for Non- Full-Size Baby Cribs," issued pursuant to a statutory requirement in section 104 of the Consumer Product Safety Improvement Act (CPSIA), and published on January 31, 2025.
This document delays until March 20, 2025, the effective date of the January 7, 2025, final rule that amends Federal Motor Vehicle Safety Standard (FMVSS) No. 225; Child restraint systems, and FMVSS No. 213b; Child restraint systems.
The Coast Guard is establishing a temporary safety zone for waters between the 14th Street Bridge to the north and the Woodrow Wilson Bridge to the south. The safety zone is needed to protect the public and vessels from potential hazards created by an aircraft collision on the Potomac River. Additionally, the safety zone is needed to ensure a safe working environment for the first responders and dive teams from passing traffic. This rule will prohibit persons or vessels from entering this zone unless specifically authorized by the Captain of the Port (COTP) Sector Maryland-National Capital Region (NCR) or a designated representative.
In December 2010, the U.S. Consumer Product Safety Commission (CPSC or Commission) published a consumer product safety standard for non-full-size baby cribs (NFS cribs) pursuant to section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA). The Commission's mandatory standard incorporates by reference ASTM F406, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/ Play Yards, with modifications that exclude sections of ASTM F406 that apply to play yards exclusively. The CPSIA sets forth a process for updating mandatory standards for durable infant or toddler products that are based on a voluntary standard, when a voluntary standards organization revises the standard. On August 1, 2024, ASTM approved a revised voluntary standard, and this direct final rule updates the mandatory standard for NFS cribs to incorporate by reference the 2024 version of ASTM F406.
In August 2012, the U.S. Consumer Product Safety Commission (CPSC or Commission) published a consumer product safety standard for play yards pursuant to section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA). The Commission's mandatory standard incorporates by reference ASTM F406, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, with modifications that exclude sections of ASTM F406 that apply to non- full-size (NFS) cribs exclusively. The CPSIA sets forth a process for updating mandatory standards for durable infant or toddler products that are based on a voluntary standard, when a voluntary standards organization revises the standard. In September 2024, ASTM published a revised voluntary standard, and this direct final rule updates the mandatory standard for play yards to incorporate by reference the 2024 version of ASTM F406.
This document delays the effective date of the November 26, 2024 final rule partially granting petitions for reconsideration of a May 9, 2024 final rule that adopted Federal Motor Vehicle Safety Standard (FMVSS) No. 127, "Automatic Emergency Braking for Light Vehicles," which requires automatic emergency braking (AEB), pedestrian automatic emergency braking (PAEB), and forward collision warning (FCW) systems on all new light vehicles.
The Coast Guard is proposing to amend existing regulations relating to special local regulations and safety zones that occur annually in Captain of the Port Zone Eastern Great Lakes. This action is necessary to provide for the safety of life on these navigable waters. We invite your comments on this proposed rulemaking.
This final rule establishes two new Federal Motor Vehicle Safety Standards (FMVSS) specifying performance requirements for all motor vehicles that use hydrogen as a fuel source. The final rule is based on Global Technical Regulation (GTR) No. 13, Hydrogen and Fuel Cell Vehicles. FMVSS No. 307, "Fuel system integrity of hydrogen vehicles," specifies requirements for the integrity of the fuel system in hydrogen vehicles during normal vehicle operations and after crashes. FMVSS No. 308, "Compressed hydrogen storage system integrity," specifies requirements for the compressed hydrogen storage system to ensure the safe storage of hydrogen onboard vehicles. These two standards will reduce deaths and injuries from fires due to hydrogen fuel leakages and/or explosion of the hydrogen storage system.
The Coast Guard is proposing to establish moving safety zones around vessels carrying oversized cargo within the Los Angeles-Long Beach Port Complex in San Pedro Bay. Safety zones around vessels carrying oversized cargo during movements within the port complex would ensure navigational safety and minimize mishaps disrupting the navigational channels. Entry of persons or vessels into these safety zones would be prohibited unless specifically authorized by the Captain of the Port (COTP) Los Angeles-Long Beach or their designated representative. We invite your comments on this proposed rulemaking.