Loading
Loading
Your feedback directly shapes Sporos.
Sign in to track your feedback history
Browse 1,000 rules and proposed rules from the Federal Register.
1,000
Total Regulations
Showing 991–1,000 of 1,000
Page 34 / 34
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A321-251NX, -252NX, -253NX, -271NX, and -272NX airplanes. This proposed AD was prompted by discovery of two bushes that had migrated on the latch shaft of an emergency overwing exit door (OWED) during accomplishment of an inspection on an in-service airplane. This proposed AD would require repetitive detailed inspections (DETs) of the affected parts and, in case of discrepancies, modification of the affected parts, and would prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
This action modifies the administrative portions of the Class E airspace legal description for Crosby Municipal Airport, Crosby, ND. This action does not change the airspace boundaries or operating requirements.
This final rule establishes two new Federal Motor Vehicle Safety Standards (FMVSS) specifying performance requirements for all motor vehicles that use hydrogen as a fuel source. The final rule is based on Global Technical Regulation (GTR) No. 13, Hydrogen and Fuel Cell Vehicles. FMVSS No. 307, "Fuel system integrity of hydrogen vehicles," specifies requirements for the integrity of the fuel system in hydrogen vehicles during normal vehicle operations and after crashes. FMVSS No. 308, "Compressed hydrogen storage system integrity," specifies requirements for the compressed hydrogen storage system to ensure the safe storage of hydrogen onboard vehicles. These two standards will reduce deaths and injuries from fires due to hydrogen fuel leakages and/or explosion of the hydrogen storage system.
This action delays the effective date of a final rule published in the Federal Register on December 9, 2024, amending Very High Frequency Omnidirectional Range (VOR) Federal Airways V-68, V-212, and V-222, and United States Area Navigation (RNAV) Route T-220; and revoking VOR Federal Airway V-558. The FAA is delaying the effective date to allow sufficient time for completing the update and flight inspection of a Standard Terminal Arrival Route (STAR) instrument procedure into George Bush Intercontinental/Houston Airport, TX, that failed the initial flight inspection and a STAR instrument procedure into San Antonio International Airport, TX, that also failed the initial flight inspection. The STARs are being amended in support of the planned decommissioning of the VOR portion of the Industry, TX (IDU), VOR/Tactical Air Navigation (VORTAC).
This action proposes to establish Class E airspace extending upward from 700 feet above the surface for Memorial Hospital Heliport, North Conway, NH. This action would accommodate a new instrument approach procedure for Memorial Hospital Heliport, North Conway, NH.
This action establishes Class E airspace at Victoria, TX to support new public instrument procedures.
This action proposes to amend the Class E airspace at Beckley, WV. The FAA is proposing this action as the result of an airspace review conducted due to the decommissioning of the Beckley very high frequency omnidirectional range (VOR) as part of the VOR Minimum Operational Network (MON) Program. This action will bring the airspace into compliance with FAA orders and support instrument flight rule (IFR) procedures and operations.
This action establishes Class E airspace extending upward from 700 feet above the surface for Transylvania Community Hospital, Brevard, NC, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures serving the heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this heliport.
The FAA is superseding Airworthiness Directive (AD) 2023-23- 09, which applied to all Embraer S.A. Model ERJ 190-400 airplanes. AD 2023-23-09 required repetitive inspections of the press-fitted bushings of the wing ailerons for migration and broken sealant, measurements of the distance between the aileron surfaces and hinge fittings, functional checks of the backlash of the wing aileron control system, and all applicable related investigative and corrective actions. Since the FAA issued AD 2023-23-09, it was determined that certain requirements needed to be clarified. This AD continues to require all actions of ANAC AD 2023-05-02 with revised compliance requirements, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
The FAA is superseding Airworthiness Directive (AD) 2023-23- 10, which applied to all Embraer S.A. Model ERJ 190-300 airplanes. AD 2023-23-10 required repetitive inspections of the press-fitted bushings of the wing ailerons for migration and broken sealant, measurements of the distance between the aileron surfaces and hinge fittings, functional checks of the backlash of the wing aileron control system, and all applicable related investigative and corrective actions. Since the FAA issued AD 2023-23-10, it was determined that certain requirements needed to be clarified. This AD continues to require all actions of ANAC AD 2023-06-01 with revised compliance requirements, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.